WOLKENKRAFT VAPEMOD CBD Starter Kit *Blue*
The WOLKENKRAFT VAPEMOD starter kit is intended for the vaporization of CBD oils and liquids. Simple function, attractive design and high quality ensure best vapors from CBD.
WOLKENKRAFT VAPEMOD Starter Kit * Blue* for CBD oils and CBD liquids
Installation instructions for the WOLKENKRAFT VAPEMOD:
2. Insert the cartridge into the battery pack.
3. Press the button. Use the WOLKENKRAFT VAPEMOD when the light shines continuously.
Operation of the WOLKENKRAFT VAPEMOD:
2. Intelligent preheat function: press the button twice briefly and the device will start preheat mode. The red LED flashes slowly for 15 seconds if the key is not pressed again.
3. Evaporation: Press and hold the button to start evaporation. After 8 seconds, the LED flashes 6x in quick succession and no more steam is produced until the button is pressed again.
4. Control the voltage level (the temperature levels): press the button 3 times briefly to switch through the temperature levels; 2.6V (green), 3.3V (yellow), 4.1V (red).
5. If there is no cartridge in the device, the LED flashes 3x fast: 2.6V (green), 3.3V (yellow), 4.1V (red).
6. The battery is empty: the LED flashes red fast 8x and it is not possible to switch on the device.
7. Charging the battery: the LED indicates the battery charge status (green> 70%, yellow 30% – 70%, red <30%). The battery is fully charged when the LED is solid green.
8. The device only supports charging via “Micro-USB”. Use only the supplied micro USB cable. Do not try to charge the device with other cables.
WOLKENKRAFT VAPEMOD Starter Kit Details:
for CBD oils and CBD liquids
1.2 ml cartridge refillable
Adjustable voltage 2,6 – 4,1V
Voltage / temperature is signaled with the respective LED color
WOLKENKRAFT VAPEMOD Starter Kit Scope of delivery:
1x 900 mAh battery
1x 510 ‘magnet adjustment ring
1x Micro USB charging cable
1x manual in German and English
Specification: WOLKENKRAFT VAPEMOD CBD Starter Kit *Blue*